20
Ordercode: 41527
Infinity iW-1240 RDM
3.1. Performance
With this menu you can set the performance settings.
01)
Choose PERFORMANCE in the settings menu.
02)
Press the
buttons to select the desired setting.
03)
Press the
button, to confirm.
04)
If you choose option PAN/TILT, you will enter a submenu.
05)
Press the
buttons to select the desired option.
06)
Press the
button, to confirm.
07)
Once you have selected the desired option, press the
buttons to change the value:
PAN REVERSE:
Normal or reverse
TILT REVERSE:
Normal or reverse
P/T SPEED:
Fast or Smooth
PAN SENSOR
From -99 to +99 (optional, see page 22)
TILT SENSOR
From -99 to +99 (optional, see page 22)
08)
If you choose the option P/T RANGE you will enter another submenu. With these options you can set
the start and end position of PAN and TILT. Use the buttons as described in steps 5-7 to change the
settings. The adjustment range is from 000-255.
09)
If you choose the option ZOOM REVERSE you can choose between YES or NO.
10)
Press the
buttons to change the value between YES or NO.
11)
Press the
button, to confirm.
12)
The following menus have more options than the regular YES/NO function:
DIMMER CURVE: Linear, Square, Inv-Square or S-Curve
DIMMER SPEED: Fast or Smooth
PWM:
1200Hz, 2000Hz, 2400Hz, 6000Hz or 25000Hz
The higher the PWM frequency, the lower the dimmer’s grayscale.
C MIX MODE:
RGBW or CMY
