5
20
Initial Massage Chair Setup
Before setting up the massage chair, make sure it has plenty of clearance.
Then use the controller to recline the chair backrest, raise the legrest,
and fully extend the massage chair.
Test all functions to ensure they are working normally, then power off the
chair and return to its original position.
To learn more about selecting a program, please refer to Controller
Instructions and Display Screen Menu Instructions.
PREPARATION BEFORE USING
Do not try to sit in the chair if the legrest is moving.
Do not put any heavy load on the legrest when it is moving.
Make sure the legrest is installed correctly.
Make sure the chair is in its original position. If any part is not in the
initial position, power on/off again to revert the whole chair back to its
original position.
Before Sitting in the Chair
Caution
Instruction of Controller
NAME AND FUNCTION OF EACH COMPONENT
When power is on, press this button. The display screen will light
up. Click up/down button to choose Auto Mode, Manual Mode,
3D Massage, Air Pressure Massage, Heat, and Setting Menu.
Click this button again to turn off all functions. The default
working time is 20 minutes.
On/Off
Menu
Click this button to choose Auto Mode, Manual Mode, 3D Massage,
Air Pressure Massage, Heat, and Setting Menu.
Feet Up
Press this button to extend the legrest. Release to stop.
Feet Down
Press this button to lower the legrest. Release to stop.
Shoulder Position Adjustment
(Moves mechanism up and down)
Under Manual Point Mode, press the up or down buttons to
set the massage on a specific area.
Under Auto Mode Body Sensor, press these buttons to adjust
shoulder position after body scan.
When massage chair is operating, press AUTO button to enter
Auto Program Menu. Choose from Sports Refresh, Extension,
Rest & Sleep, Working Relief, Neck & Shoulder or Waist &
Spine (3D massage excluded).
(See the LCD menu for detail.)
Auto Programs
Direction Adjustment
Under Menu and Auto Mode, press this button to adjust
direction. When program is selected, press the middle
OK button to confirm it and enjoy the chosen massage.
During the massage, press OK button to switch to zero
gravity. Press up or down button to adjust mechanism
speed. Press left or right button to adjust airbag intensity.
3D Massage
Under Auto or Manual Mode, press 3D button to adjust the 3D
intensity.
