5
88
20cm
50cm
NAME AND FUNCTION OF EACH COMPONENT
Installation position
Please place the massage chair in an ample space: The horizontal
interval between the backrest ascending to the highest point and
descending to the lowest point should be 50 cm. The horizontal
interval between the legrest ascending to the highest point and
descending to the lowest point should be 40cm. To make sure more
than 50 cm horizontal distances are left for the back part of chair, and
more than 20 cm horizontal distances are left for the front part.
Keep the massage chair more than 1 meter away from TV, radio, and
some other audio-visual equipment to avoid signal interference.
The floor may be worn by the massage chair, so it is advised to put
some cushion material (for instance: a carpet) under the massage
chair to protect the floor and reduce noises.
Installation method
(More than 4 people are needed when move the massage chair)
Step 1:
Open the carton, and take out the main unit and controller of the
massage chair separately. Check whether the components are complete
according to the packing list.
PREPARATION BEFORE USING
Function Description on Controller
Power On/Off
: press this button to turn on or off the whole unit.
(The default massage time is 20 minutes)
When the indicator light of power icon is flashing, all the functional buttons
are under non-operable state, press this button to turn on massage function;
When power is on, the default massage mode is auto Refresh .
When the indicator light of power icon is constant on, press this button for 3
seconds to turn off all massage function, and then the massage chair will
return to standby mode.
When the indicator light of power icon is off, all the function buttons on
control panel will stop work.
Recovery
: Press this button to turn on or off recovery auto massage function.
When the indicator light of this icon is off,press this button,the
indicator light will be lighted up, and the recovery function is
turned on; this automatic program adopts moderate strength
massaging a large part of body.
When the indicator light of this icon is constant on, press this button,
the indicator light will be off, and the recovery function is turned
off; at this moment, the back massage unit is in halted state.
Refresh
: Press this button to turn on or off Refresh auto massage function.
When the indicator light of this icon is off, press this button, the
indicator light will be lighted up, and the refresh function is
turned on; this automatic program adopts moderate strength
massaging a large part of body.
When the indicator light of this icon is constant on, press this button,
the indicator light will be off, and the recovery function is turned
off; at this moment,the back massage unit is in halted state.
Extend
: Press this button to turn on or off
Extend auto massage function.
When the indicator light of this icon is off, press this button, the
indicator light will be lighted up, and the extend function is
turned on; this automatic program is a partial massage program
mainly for massaging neck and waist.
When the indicator light of this icon is constant on,press this button,
the indicator light will be off, and the extend function is turned
off;at this moment,the back massage unit is in halted state.
Relax
: Press this button to turn on or off Relax
auto massage function.
When the indicator light of this icon is off, press this button, the
indicator light will be lighted up, and the Relax function is
turned on; this automatic program is a partial massage program
mainly for massaging waist.
When the indicator light of this icon is constant on, press this
button, the indicator light will be off, and the relax function is
turned off;at this moment,the back massage unit is in halted state.
Part:
Under manual massage mode, the indicator light of this icon is
constant on, and this function button is at operable state; press this
button to circularly demonstrate following modes: Whole, Partial
and Point.
When the indicator light of this icon is off, this function button is at
inoperative state.
Summary of Contents for IT-7800
Page 1: ......
