13
________________________________________________________
Spa Specifications
ELECTRICAL AND PEDICURE SPA COMPONENT
SPECIFICATIONS
All electrical connections MUST be made by a qualified, licensed electrician in accordance with Local & National
Electrical and Building Codes. A 110V-50/60 Hz, 15 Amp, GFCI protected grounded circuit MUST be used to
supply power to the Pedicure Spa. A dedicated circuit must be used with a GFCI. All wiring must conform to
National & Local Electrical Codes
.
WARNING:
IT IS EXTREMELY IMPORTANT THAT THE FOOT SPA OPERATES WITH GFCI PROTECTION
VERY IMPORTANT Both back of chair and seat are adjustable. When both are at maximum positions one must
allow 18”(44cm) from back wall to foot spa. This minimum distance assures unobstructed recline. Failure to follow
this required dimension might damage your spa components and plumbing connections, which will void your
warranty.
PEDICURE SPA SPECIFICATIONS:
•
Construction: Marble composite, high gloss, acetone-proof gel coat.
•
Two (2) electro-mechanical knobs control the drain and whirlpool. (*found on Auto-Fill™ only models)
•
One (1) Digital Automated System Control Panel (**found on AutoClean™ models)
•
Electro-mechanically operated reclining, massaging, and sliding seat with hand held control.
•
One (1) magnetic pipe-less whirlpool jet. (Pipe-free technology)
•
Power drain or Gravity drain
•
Extendable water spray positioned well above water line, air gap is accommodated with back-flow
prevention required by plumbing code
•
Depending on pedicure spa model, arms may swing open, swing up / down or slide forward / backward.
SPECIFICATIONS
Spa Dimensions & Weights
Adjustable Stool
Infinity™ Spa (seat up-right): L=53”(134cm),
W=31”(79cm) w/ Tray =46”(117cm) H=57”(145cm)
Empty Weight: ~ 200 lbs.
Shipping Weight: ~ 260 lbs.
Pedicure Stool: 12” – 13”.
Manicure Stool: 16.25” – 20”
Spa Water Capacity
~ 4.5 US Gallon
Jet Motor
120 VAC. at 85W 60Hz
Massage Motors,
Seat Sliding & Reclining
24VDC, 135W
Discharge Pump
Motor – 120V at 85W 60 Hz Maximum vertical lift: 3ft . Flow rate 500 GPH @ floor level
Power source
115 VAC, 60HZ, Power needed per spa chair = 6 Amp
Electrical Switches
AutoFill™ Model : One (1) electro-mechanical knob for the Whirlpool. Rated at 5A contact.
One (1) electro-mechanical knob for the Drain. Rated at 5A contact.
AutoClean™ Model : Digital Automate Control Electronic Panel
Plug & Play Installation
Installation should be made with connection at the external interface parts.
Please consult with your local plumber.
Safety
Infinity™ Pedicure Spa is UL listed.
