24 |
www.HandiQuilter.com
To replace the blade
The blade should not need to be replaced very often. Of course user conditions, type of threads, and
other variables will affect the frequency the blade will need to be changed.
1.
Remove the two needle plate screws.
2.
Carefully remove the needle plate and tip it
over onto the hook frame, taking note of which
way you twist the wires so you can untwist
them when you replace the needle plate.
Â
IMPORTANT
: Before changing the blade
take note of the small screw end that
goes into the hole in the cutting blade, it
will need to be in the new blade after it is
replaced and the thread cutter assembly is
remounted.