HQ Infinity Service Manual
| 41
To identify each of the wheel axle housings (when looking from the front of the machine)
•
Front left housing has no cutout for the HQ Pro Stitcher
Y-rack; no axle; no slotted hole between the four mounting
screws; and mounting holes are not elongated for
adjustment.
•
Front right housing has cutout for the HQ Pro-Stitcher
Y-rack; no axle; no slotted hole between the four mounting
screws.
NOTE
: All four mounting holes are elongated for
adjustment (circled at right).
•
Rear left housing has no cutout for the HQ Pro-Stitcher
Y-rack; short axle; slotted hole between the four mounting
screws; and mounting holes are not elongated for
adjustment.
Y-Rack
Cutout
Slotted hole