48 |
www.HandiQuilter.com
The idlers for later HQ Infinity machines were changed so that all spacers are both 3.5mm and black. They
can be used whether the flange lip is on the inside or outside.
When idlers are removed, be sure to note the position of the idler flange (whether it is inside or outside)
and the size of the spacer washer used (whether it is thick, thin or the same).
Â
IMPORTANT
: The machine assemblers are at liberty to set the flanges inside or outside, as they
determine best for each machine to achieve optimal belt tracking.
NOTE
: Use a 5mm hex tool for the idler fixing screws.
13. Presser Bar Height
The hopping foot mount has about three exposed
threads below the jam nut.