52 |
www.HandiQuilter.com
To check the left-to-right needle position
•
The needle should be relatively centered left to right in the needle plate.
To correct the left-to-right needle position
Â
IMPORTANT
: Before making this adjustment, ensure that the needle is straight. Use a size 16/100
MR needle.
1.
Use a 2.5mm hex tool to remove the two front
covers. Use a 10mm wrench to loosen the three
bulkhead bolts slightly, about one third of a
turn.
2.
Use a 2.5mm hex tool to loosen the two
adjusting screws, one on each side of the head
frame.
3.
Rotate the hand wheel until the needle eye is about even with the needle plate hole.