AT1280 Online Temperature Measurement Thermal Camera User Manual
7
9.Quick Start Guide
Please follow the steps:
1.
Install IRT_TAS_AT, the software may be updated, the actual version shall prevail.
The computer configuration for installing the software is recommended to meet the
following conditions: i5-9500T and above CPU, 8G and above memory, 64-bit
win10 system, support Gigabit network.
2.
Follow the installation instructions in Chapter 11.1.2 to connect the thermal
camera, power supply, and a computer. You can also connect to the Ethernet cable
through the PoE power supply module.
3.
Follow the instructions in
IRT_TAS_AT_User Manual
to set the computer IP.
4.
Run IRS_TAS_AT as an administrator, enter the correct user name and password,
and click Login.
5.
Continue to follow the procedures in the software instructions. If the camera is
successfully connected and the image is normal, then the software can be used for
thermal imaging control and temperature analysis.
