AT1280 Online Temperature Measurement Thermal Camera User Manual
10
11.1 Camera Mounting
11.1.1 Illustrations
11.1.2 Explanations
1.Fix the thermal camera at the desired location according to the specific use method. The recommended
location is in a sheltered area with a relatively stable thermal state.
2.Connect the power cable to the power adapter and interface 1 respectively, power on the thermal
camera, and connect the two ends of the network cable to interface 2 and the PC Gigabit Ethernet port
respectively.
3.Wait 30 minutes after you have stated the camera, then the temperature can be measured and
analyzed by the client software of the computer.
Connecting Camera
Interface 2
Interface 1