Dual-spectrum Network Bullet Camera User Manual
20
preview interface turns black and white; switch from black and white to color,
the optical image in the preview interface turns colorful.
3.
The supplement lamp will be turned on or turned off through on/off button.
Switch “Day/Night Conversion Mode” to “auto”, then the Day/Night
Conversion will be switched automatically according to illumination intensity.
The default status is auto on.
1.
The optical image is colorful and the supplement lamp is off at daytime with
normal illumination intensity.
2.
The optical image is black and white and the supplement lamp is on at night
with low illumination level.
Switch “Day/Night Conversion Mode” to “by time”, then the day/night
conversion will be switched according to the set time.
2.3.3.5Image Flip
Select “Image Flip”, the corresponding setting is as following:
Figure 2.25
Image Flip Page
Select image flip type, the preview image will flip horizontally or vertically.
2.3.3.6Visible Anti-flicker
Select “Visible Anti-flicker”, the corresponding setting is as following:
