V1.0.1 - 14 -
Yantai IRay Technology Co., Ltd.
11th Guiyang Street, YEDA
Yantai 264006, P. R. China
⚫
The germanium window surface is coated with anti-reflection coating, dust,
grease, fingerprints will produce harmful substances and lead to its performance
decline or cause scratches, once found dirt, please follow the following methods.
1)
Use a blown balloon or a soft brush to clean the lens surface and avoid dust
particles scratching the anti-reflection film on lens surface during the wiping
process.
2)
Use soft cotton cloth or lens wiping paper to dip in alcohol or lens wiping
liquid, gently wipe the lens surface from the middle to the edge, pay attention to do
not squeeze the lens surface, wipe liquid also can not dip in too much, make sure the
cloth is wet, but wipe liquid can not be extruded. If still not clean, replace the cloth
and repeat operation.
6.3 Safety Codes
⚫
Please use standard power supply, to avoid the camera is damaged by
over-voltage.
⚫
Short-circuit is prohibited.
⚫
Hitting or beating the product with sharpen object is prohibited
；
⚫
The product shall not be exposed in the high temperature environment which is
higher than 80℃.
⚫
Do not put the product into the fire.
7 After Sales Service
The ITS II precision body temperature measuring infrared camera is developed by our
company and has good after-sales service guarantee such as equipment maintenance
and repair. If you have any needs, please contact our company.
8 Company Information
IRay Technology Co., Ltd.
Website: www.IRaytek.com
Phone: 86-0535-3410623
