C Series Handheld Thermal Camera
·
User Manual
5
4. Operating Instructions
4.1 Power On & Off
1. In the shutdown status, long press the power button to power on.
2. In the power-on status, long press the power button to power off.
3. If the device crashes, you can forcibly shut it down by pressing and holding
the power button.
4.2 Saving Images
1. In the auto save mode, click the trigger to save the picture automatically
2. In the manual mode, click the trigger, then manually save images or cancel
saving.
Note: the auto/manual mode can be switched in the "Settings - auto save" option.
4.3 View / Delete Pictures
When you take and save a picture, it will be stored in SD card, you can view the
saved image at any time as follows:
1. Click the View Memory button to enter the library.
2. Use the direction button to select the picture you want to view.
3. Press confirm button to view the picture in full screen.
4. Click the View Memory button or the return button continuously to return to
the thermal imaging interface.
4.4 Center Point Temperature Measurement
You can use point temperature measurement for temperature measurement. The
measurement results will be displayed in the upper left corner of the screen, see
Section 3.4
1.
In the thermal imaging interface, press the center button to display the main
toolbar