TianXuan M Series Handheld Thermal Camera User Manual
V1.0.0
9
thermal camera to the object. If the preset registration parameters cannot meet
the requirements, you can also manually perform fusion registration in the
settings.
4.8.2 Setting Steps
In the observation interface, press OK shortly to enter the main menu, and select
"image mode" through the navigation button. Then press OK again to enter the
secondary menu, there different image mode can be selected by shifting left or
right on the navigation button. Save your option by pressing enter button.
In the observation interface, click any place on the screen to enter the main menu.
Click "image mode" and select the desired image mode, and then click on the
screen area. The option is saved.
4.9 Non-uniformity Correction
4.9.1 Non-uniformity Correction Introduction
Non-uniformity correction is used to compensate for non-uniformity of detector
pixels or non-uniformity caused by other optical interference. When there are
more noise in the image, non-uniformity correction is needed, which is common
when the ambient temperature changes rapidly.
4.9.2 Non-uniformity Correction Operations
In the imaging interface, press the back button or the gallery button continuously
to perform non-uniformity correction.
4.10 Contrast Adjustment
In the observation interface, the contrast of the infrared image can by adjusted by
sliding up and down the arrow button on the "temperature range " on the right
side of the screen.
Press "A" in the upper right corner of the interface to return to auto-contrast mode.
4.11 Other Settings
Other settings include date and time, unit, language and other items.