TianXuan M Series Handheld Thermal Camera User Manual
V1.0.0
8
⚫
Ambient temperature: the reflection temperature of the object surface will
affect the measurement result, especially when the object emissivity is low or the
object temperature and the reflection temperature differ greatly, this effect will
increase. So the result needs to be compensated to eliminate influences of the
surface reflection temperature. However, it is usually difficult to determine the
reflected temperature of an object. The ambient temperature can be used to
replace the reflected temperature in actual measurement.
⚫
Distance: distances have effects on the measurement results. In order to
get accurate measurement, distance information of the object is necessary for the
thermal camera to compensate the result.
4.7 Palettes
In the observation interface, short press OK to enter the main menu, and select
"palette setting" with the navigation button. Press OK again to enter the sub
menu, select different palettes by shifting left and right on the navigation button,
and then press the enter button to save your option.
In the observation interface,
click anywhere on the touch screen to enter the
main menu. Click "palette setting" to choose a palette and save your option by
clicking the screen area.
4.8 Image Mode
4.8.1 Image Mode Introduction
Four image modes are available.
⚫
Thermal Fusion
: an image fused to a certain scale between an infrared image
and a visible image
⚫
PIP
: infrared image superimposed at the center of the visible image
⚫
Thermal imaging
: infrared images
⚫
Digital camera
: visible images
Note: For better dual-light image effects, when in PIP or thermal fusion modes,
you need to set the actual distance, that is, the approximate distance from the
