InfiRay Outdoor
•
Tube TH35/TH50
•
Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
18
PIP Function
Picture-in-Picture (PIP) provides a floating window independent of the main
image. This window shows the image which is enlarged to 2× in a certain
area centered on the reticle of the main image.
⚫
On the home screen, press and hold the
Palette button (6)
to switch
the PIP function on/off.
⚫
When the PIP is on, a separate
'window' is appeared on the top
of the display simultaneously with
the main image.
⚫
When the main image is enlarged
by rotating the
encoder (7)
, the
image shown in the PIP window
is also enlarged accordingly.
19
Stadiametric Rangefinder
The Tube series provides stadiametric rangefinder, which allows you to
calculate the approximate distance from a target with a known size.
⚫
On the home screen, press and hold the brightness button
(4)
to turn
the stadiametric rangefinder function on.
⚫
When the function is on, two lines used for measuring appear in the
middle part of the image, and three icons of pre-configured objects
and the values of measurement distance are displayed on the right
side.
⚫
Three pre-defined target values
are provided as follows:
-
Deer: 1.7m high
-
Wild boar: 0.9m high
-
Hare: 0.2m high
⚫
Adjust the device to locate the
target in the center of the
display area. Rotate the rotary encoder
(7)
clockwise to enlarge or
anticlockwise to reduce the width of the measurement lines, so that
the target is completely between the measurement lines. While
adjusting the width of the measurement lines, the rangefinder values
on the right change accordingly.
⚫
The color and center position of the measurement line are
synchronized with the reticle.
⚫
If you want to change the measurement unit, please go to
Main
