10
11
VANGUARD ASSEMBLY INSTRUCTIONS
STATION STRUCTURE ASSEMBLY
D1.
Attach the two Bearing Flats to the Main MEC Frame using 2 – 3/8” x 4 ½” bolts, 4 –
½” barrel spacers, 4 -3/8” flat washers and 2 – 3/8” nuts.
D2.
Attach the two Bearing Brackets to the Main Upright using 2 – 3/8” x 3” bolts, 4 –
3/8” flat washers and 2 – 3/8” nuts.
D3.
Assemble the Press Arm Support Ass’y to the Main Upright using 1 – 3/8” x 3 ½”
bolt with the blue patch, 1 – 3/8” x 3 ¾” bolt, 3 – 3/8” washers, and 1 – 3/8” nut.
D4.
Attach the Seat Frame to the Main Upright using 2- 3/8” x 3 ¾” bolts, 4 – 3/8”
washers, and 2 – 3/8” nuts.
D5.
Attach the Seat Frame to the Base Tube using 1 L/H Bracket, 1 – R/H Bracket, 2 –
3/8” x 3” bolts, 4 – 3/8” washers and 2 – 3/8” nuts.
D6.
Insert the Seat Stem into the Seat Frame with the positioning holes facing forward.
Install the 1/4” x ¾” socket head cap screw into the hole at the back of the Seat
Stem.
10
2 - Bearing Flats
4 - 1/2" Barrel Spacers
2 - 3/8" x 4 1/2" Bolts
4 - Washers
2 - Nuts
2 - Bearing Brackets
2 - 3/8" x 3" Bolts
4 - Washers
2 - Nuts
1 - Press Arm Support
1 - 3/8" x 3 3/4" Bolt
1 - 3/8" x 3 1/2" Bolt
with Blue Patch
3 - Washers
1 - Nuts
1 - Seat Frame
2 - 3/8" x 3 3/4" Bolts
4 -Washers
2 - Nuts
1 - L/H Bracket
1 - R/H Bracket
2 - 3/8" x 3" Bolts
4 - Washers
2 - Nuts
D1
11
D2
D3
D4
D5
VIEW FOR OPPOSITE BUILD
1 - Seat Stem
1 - 1/4" x 3/4" Socket
Head Cap Screw
D6
