Preparations
1.
Unfold package to ensure your iShare and its accessories are complete and intact.
Model
Receiver
Antenna
Dongle
iShare 100
1x
Built-in
1x
iShare 200
1x
3x
2x
iShare 400
1x
4x
4x
2.
Mount antenna to receiver, connect iShare receiver to display device (such as monitor, IFP
and projector), and power up iShare. It takes 15-20s to enter into home page.
3.
Home page interface as below illustrated:
4.
A USB mouse is required to set up iShare by plugging into receiver through USB port. Left
click represents
“
Confirm
”
and right click represents
“
Back
”
.
5.
Long press any of icons at right bottom to call out control center and select <Setting>.
