![background image](http://html1.mh-extra.com/html/infobit/iwall-360/iwall-360_user-manual_2057125025.webp)
24
Figure 5
-
24
Tip:
(1) If there is already a window open, you can still click the "open window" button, then close the
original window and open a full screen window at the same time.
(2) When there are multiple devices, if the device is set to "
Change Device
" mode, whichever
signal source is selected, the window will be opened by the signal source of the main equipment.
(2) Close window
In the input interface, click the "close window" button.
(3) Zoom window
Method 1: Place the mouse pointer at the window edge on the non “output” interface. After the
pointer changes, you should drag the mouse to change the size of the window.
Method 2: Fill in the corresponding length and width at the bottom of “device” interface. After
filling in, press the ENTER button to take effect.
1
2
3
Summary of Contents for iWall 360
Page 1: ...iWall 360 User Manual...