11
USING THE PROJECTOR
This section describes how to use and make adjustments to the
projector. It also provides a reference to the keypad and remote
buttons and the options available from the on-screen menus.
Adjusting the Image
To focus the image, rotate the focus ring (Figure 7) until the image
is clear. To zoom the image, rotate the zoom ring. This adjusts the
image size without affecting focus. Turn the ring in the “Wide”
direction to make the image larger and in the “Tele” direction to
make the image smaller.
F
IGURE
7
Focus ring and zoom ring
The projector is equipped with self-locking, quick-release eleva-
tor feet (Figure 8).
To raise the projector:
1
Lift the front of the projector and lift the feet lock latches on
both sides of the projector (Figure 8).
2
Raise the projector to the height you want, then release the
latches to lock the elevator feet into position. If necessary, turn
the feet to fine tune the position and tilt.
zoom ring
focus ring
