Page 10
4)
Connect one end of the AC power cord to the AC In jack on the back of the speakers.
5)
Connect the other end of the AC power cord to the AC Out jack on the bottom connector panel of the display.
ON/OFF
POWER
SUB
L
INPUT
6)
Plug the speakers’s audio cable into the Audio Out (RCA R/L) jack on the bottom connector panel located on the back of the
display.
7)
Turn the power switch
ON
.
Attaching the HD video conferencing camera
1)
Remove the plastic film from the camera lens.
2)
Align the camera bracket with the screw holes on the top edge of the backside of the display and then secure the camera to the
display with the two provided thumb screws.
3)
Plug the USB cable into the USB slot immediately below the camera on the back of the display.
4)
Manually tilt and pan the camera (+/- 40°) as desired.
