• 34 •
Storage of your Finetest™ Lite System
To prevent the meter and test strips from getting dirty, dusty or other contamination, please
wash and dry your hands thoroughly before use.
Meter Storage
•
Storage condition: 2~30
℃
or 36~86
℉
(Temperature)
•
Always store and transport the meter in its original storage case.
•
Avoid dropping and strong impact.
•
Avoid direct sunlight and humidity.
Test Strip Storage
•
Storage condition: 2~30
℃
or 36~86
℉
(Temperature)
•
Store your test strips in their original container only. Do not store the test strips in other
containers.
•
Store test strip packages in a cool and dry place. Keep away from direct sunlight and heat.
•
Do not freeze.
•
After removing a test strip from the container, immediately close it tightly.
•
Record the discard date (date container opened, plus 6 months) on the test strip label.
•
Do not use if it is expired(2 years) after manufacturing.
•
Touch the test strip with clean and dry hands.
•
Do not use if 6 months have been passed, since the opening of the container cap for test
strips.
Control Solution Storage
•
Storage condition: Store in a cool, dry place at between 8~30
℃
or 46~86
℉
(Temperature)
•
After use, close cap tightly.
•
Make sure the control solution bottle is tightly closed.
•
Record the discard date (date container opened, plus 3 months) on the control solution on
the bottle.
•
Do not use if expiry date has passed.
•
It expires in 24 months after manufacturing date.
•
It expires in 3 months after opening the container cap.
CAUTION
1. Store the
Finetest™ Lite test strip container in a cool, dry place. Keep out of direct
sunlight. Do not freeze.
2. Store test strips in their original container only. Do not mix the test strips in new
containers or in any other container.
3. Immediately replace the container cap and close tightly after removing any test
strips from the container.
4. Make a note of the discard date, which is six months from the date you first open a
new container of test strips. Throw Finetest™ Lite test strips and container away
after the discard date.
5. Do not use the test strips after the expiration date printed on the package or
container, Testing with expired strips it may cause inaccurate results.
6. Do not test at temperatures below 10
℃
(50°F) or above 40
℃
(104°F).
7. Do not test with humidity below 10% or above 90%.
8. Do not bend, cut, or alter the test strip.
9. Avoid getting dirt, food, and water on the test strip with wet hands.
10. Avoid getting dirt, food, and water on the color-coding label (backside of test strip).
Summary of Contents for Finetest Lite
Page 2: ......
