Instruction Manual
5
1. Insert the connector from one end of the eSATA cable into the rear eSATA port
(marked
S-ATA II
) of the drive enclosure.
2. Connect the remaining end of the eSATA cable (sold separately) to an available eSATA
port on the host computer. If the host computer does not have an eSATA connector
available, or you require an eSATA cable, please see
Accessories available from
StarTech.com
on page 9.
3. Power on the host computer, once the enclosure has been connected.
4. Press the Power button on the front panel of the drive enclosure.
Using USB
When used with a computer running Windows 98SE or above and connected via USB,
the drive enclosure can be connected and disconnected while the computer is running:
1. Insert the type ‘B’ connector provided by the USB cable (included) into the rear USB
port (marked USB 2.0) of the drive enclosure.
Connecting the enclosure to the Host computer
Using eSATA
2. Connect the remaining end of the USB cable to an available USB port on the host
computer or to a USB hub connected to the host computer.
3. Connect the external power adapter provided (12V DC, 1.7A) to an available power
outlet. Insert the remaining (cylindrical) connector to the port marked
DC IN
on the
rear panel of the hard drive enclosure.
4. Press the Power button on the front panel of the drive enclosure. The drive is now
ready for use, and should be visible under
My Computer
.
