33
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line
– Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 04 17 AA 59 201 06
2.13 Battery Module Installation
The weight of Battery Module is heavy so at least two persons are required for
handling.
Before performing the Battery Module installation/ replacement, make sure the
Battery Breaker is in the OFF position.
2.13.1 Insert the Battery Module (Only Standard Series Cabinet)
(1.)
Open the UPS’s front door and remove the panel of battery module slot.
(2.)
There are 4 rails for inserting the Battery Modules in the same layer. Four Battery Modules
MUST be installed to form a set of Battery.
(3.)
Regarding the maximum load of power modules, please refer to section 2.10.2 to install the
required Battery Modules.
(4.)
Secure the Battery Module to the cabinet by fixing the screws of the Battery Module.