INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line
– Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 06 15 29 59 203 20
7
Step 4: Disable/Enable ROO/RPO function
Contact open:
UPS shuts down.
Contact closed:
UPS start-up (UPS is
connected to AC power and AC power
is available).
Note:
The local ON/OFF control by
pressing On/Off button overrides the
remote-control function.
Contact open:
UPS shuts down and
Fault LED (3) will be ON.
To return to normal operation, de-
activate external remote contact (Fault
LED (3) will be OFF) and restart the
UPS by pressing button.
Step 5: Turn on/off the UPS
Press the ON/OFF button on the front panel for two seconds to power on the UPS.
Step 6: Install software
For optimal computer system protection, install the UPS monitoring software to fully
configure UPS shutdown. You may insert provided CD into CD-ROM to install the monitoring
software. If not, please follow steps below to download and install monitoring software from
the internet:
1. Go to the website
http://www.infosec-ups.com
2. Click ViewPower software icon and then choose your required OS to download
the software.
3. Follow the on-screen instructions to install the software.
4. When your computer restarts, the monitoring software will appear as an orange
plug icon located in the system tray, near the clock.
