INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 05 18 AA 59 205 02
9
1 0 . T E C H N I C A L S P E C I F I C A T I O N S
Z3 ZenBox EX
500
Z3 ZenBox EX
700
Z3 ZenBox EX
1000
TECHNOLOGY
Technology
High Frequency (microprocessor-controlled)
Power
500 VA
700 VA
1000 VA
Output form
Modified Sine wave
Protection
Discharge / overcharge / over-voltage / Short c phone/ADSL line
protection
Power factor
0.5
0.5
0.5
PHYSICAL CHARACTERISTICS
Dimensions
HxWxD (mm)
200 x 230 x 92.5
Weight kg
2.5
3.1
3.4
Output connectors
3 backup time outlets
(FR/SCHUKO)
+ 3 surge protected
outlets (FR/SCHUKO)
+ USB port + RJ45
4 backup time outlets (FR/SCHUKO)
+ 4 surge protected outlets (FR/SCHUKO)
+ USB port + RJ45
INPUT TECHNICAL CHARACTERISTICS
Voltage
220/230/240 V
Voltage range
180/270 V
OUTPUT TECHNICAL CHARACTERISTICS (battery mode)
Voltage
220/230/240 V
Voltage regulation
± 10 %
Frequency
50 or 60 Hz ± 1 Hz (self-sensing)
TRANSFER TIME
Typical
2-6 ms
INDICATORS
AC mode
Green LED on
Battery mode
Green LED flashing every 10 seconds
Low battery at battery
mode
Green LED flashing every second
Fault
Red LED on
AUDIBLE ALARMS
Battery mode
Beep every 10 seconds
Low battery in battery
mode
Beep every second
Fault
Continuous beep
BATTERY
Battery number & type
12V/4.5Ah x 1
12V/7Ah x 1
12V/9Ah x 1
Backup time
(*depending on the connected
loads)
Up to 8 min*
Up to14 min*
18 min*
Recharging time
8 hours to 90% after complete discharge
ENVIRONMENT
Ideal Environment
0-40°C, 0-90% of relative humidity (without condensation)
NORMS
Security / Standard
CE RoHS
