User Manual for V2.8
–
2/21/2020
34
8. Additional Information
8.1. Wireless Device
Contains FCC ID: OUR-XBEE/OUR-XBEEPRO
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1.
This device may not cause harmful interference
2.
This device must accept any interference received, including interference that may cause undesired
operation.
8.2. Maintenance
8.2.1. General Cleaning Recommendation
Under recommended operation of the SL-RAT device, maintenance should be minimal. It is recommended to
clean the exterior of the SL-RAT device with a mild disinfecting wipe or a mild general purpose cleaner after
each daily use. Do not use harsh chemicals on the exterior. Do not open Electronic Case, remove TX Speaker
and/or remove RX Microphone in order to perform maintenance - cleaning or otherwise.
8.2.2. TX Speaker & RX Microphone
User maintenance is required if the TX Speaker or RX Microphone are fouled with debris, dirt or have been
exposed to harsh chemicals airborne or otherwise. Under any of these conditions, they are required to be
cleaned.
Cleaning - DO NOT USE CLEANERS OR CHEMICALS. Use a mild liquid dish soap and water mixture on a clean
rag to clean the exterior of the TX Speaker or RX Microphone.
If the SL-RAT
™
device is regularly exposed to harsh environments, then the SL-RAT
™
TX and RX should be
returned to the factory at least one time per year to provide more extensive cleaning, inspection of seals,
cables, and electronics.
Opening the electronics’ case will void the warranty. All repairs requiring opening of the electronics’ case,
should only be performed by factory trained technicians.
8.2.3. Lock Knob Maintenance
The two lock knobs (Figures 1 & 2) on both the SL-RAT
™
RX and TX should be oiled at least once per year
more often if the device is regularly exposed to wet weather, wet environments and/or harsh environments.
8.2.4. Battery
The rechargeable Li-ion battery is not customer replaceable. Please return the RX or TX component to the
Manufacturer for battery replacement.
9.
Specifications
9.1.
General
•
Dimensions: 33” x 14” x 5.5”
•
Weight: TX 15 lbs; RX 10 lbs (weight without optional frame cushions)
•
Operating Temperature: -20 to 60 degrees Celsius (-4 to 140 degrees Fahrenheit)
