background image

 

KE-28XX InfoTag

® 

Marker 

Copyright © 2016 InfoSight Corporation All Rights Reserved 

Page iii 

 

SOFTWARE/FIRMWARE LICENSE AGREEMENT 

 
 

IMPORTANT:  THE SUBJECT PROGRAMS ARE LICENSED BY INFOSIGHT CORPORATION TO END-
USERS FOR THEIR USE ONLY ON THE TERMS BELOW.  ACCEPTING AND USING THESE PROGRAMS 
INDICATES YOUR ACCEPTANCE OF THESE TERMS.  THIS IS A LEGAL AGREEMENT BETWEEN YOU, 
THE END USER, AND INFOSIGHT CORPORATION. 
 
1)      GRANT OF LICENSE.  INFOSIGHT CORPORATION ("INFOSIGHT") agrees to grant to you a non-
exclusive license to use the INFOSIGHT software/firmware program (the "PROGRAM") subject to the terms 
and conditions of this license agreement. 
 
2)      DEFINITION OF TERMS.  The term SOFTWARE refers to a computer program stored on a floppy 
diskette, hard disk, magnetic tape, or paper tape that must be loaded into the computer's memory to be 
executed.  The term FIRMWARE refers to a computer program stored in semiconductor memory (ROM, 
PROM, EPROM, EEPROM, NVRAM, etc.) that is an integral part of the computer's memory.  Together, these 
forms of computer programs are referred to as the "PROGRAM". 
 
3)      COPYRIGHT.  The PROGRAM(s) and Documentation is owned by INFOSIGHT and is protected by 
United States copyright laws and international treaty provisions.  The PROGRAM(s) contain trade secrets and 
proprietary property of INFOSIGHT.  You may make one copy of the PROGRAM(s) solely for backup or 
archival purposes provided that the copy clearly displays the INFOSIGHT copyright notice.  Additional copies 
may be made when authorized to do so in writing by INFOSIGHT.  In addition to any other right of INFOSIGHT, 
INFOSIGHT has the right to terminate this license if the terms of this license are violated. 
 
4)      RESTRICTION ON USE AND TRANSFER.  The single-processor version(s) of the PROGRAM(s) and 
Documentation are to be used on one computer or embedded system at any one time.  The multi-processor 
version(s) of the PROGRAM(s) and Documentation may be used over a network provided that the number of 
computers accessing the network simultaneously shall not exceed the number authorized by INFOSIGHT or 
for which you paid the corresponding multi-processor fee.  You may not distribute the programs or 
Documentation to a third party.  You may transfer the license and complete package (retaining nothing) if the 
transferee agrees to the terms of this License Agreement.  Neither the PROGRAM(s) nor the Documentation 
may be changed or translated without express written permission of INFOSIGHT.  You may not reverse 
engineer, decompile or disassemble the PROGRAM(s). 
 
5)      WARRANTY for the subject PROGRAM(s) is covered under the INFOSIGHT STANDARD TERMS AND 
CONDITIONS OF SALE. 
 
6)      TERM.  The license is effective until terminated.  It will be terminated if you fail to comply with any term or 
condition of this License Agreement.  You may terminate this License Agreement at any time.  In the event of 
termination, you agree to destroy the PROGRAM(s) and Documentation together with all copies and related 
material. 
 
7)      YOUR USE OF THIS PROGRAM(S) acknowledges that you have read this License Agreement and 
agree to its terms.  This agreement is complete and supersedes any other agreement that may have related to 
the subject matter of this agreement. 
 

Summary of Contents for INFOTAG KE28 Series



































Reviews: