8
7. Function Programming
Note: any programming must be done directly into the unit via a phone
hand set and not via the M60 or any other equipment.
7.1. Programming.
Before you do the following programming; Lift the phone handset or press
hands free key of the telephone, now press the buttons according to the
following instructions. When finished you will hear 2 beeps this will
signal the programming has been successfully.
7.1.1. Restore to default settings.
*#99#99# restore to factory default setting.
7.1.2. Bar incoming call settings.
*#14#00# 14--command,00--value,00--no barring, 01--set
barring default setting --00
7.1.3. Pin code
1.
Start PIN code check and automatic PIN lock
function
*#07#*1234# 07--command, 1234 = your current
SIM card PIN code.
If set successfully, the device will start the PIN code
check, and automatically change the current
SIM Card into "PIN on" from "PIN off".
2.
Close PIN code check and automatic PIN lock
function.
*#08#*1234# 08--command, 1234 = your current
SIM card PIN code.
If set successfully, the device will close the PIN
code check and automatic PIN lock function.
3.
Change PIN code, open automatic PIN lock
function
*#09#1234*56785678# 09-command, 1234 = your
current sim card PIN code, 5678 = new PIN code.
(5678 can be any other 4 digits number, e.g. 2012).
If change was successful, the device will change the
current sim card PIN code as you selected.
