M60 Operating Instructions
46
C
h
ap
te
r
4
Press the ‘
Y
’ key to proceed in Edi�ng the Alarm delay or the ‘
N
’ key to return
to Keypad op�ons.
If you press the ‘
Y
’ key the display will be similar to below:
Y=Edit
N=Exit
Delay is [ 60]Secs
********************
Press the ‘
Y
’ key to proceed in
EDIT
ing the current alarm delay or the ‘
N
’ key to
return to Keypad op�ons.
If you pressed the ‘
Y
’ key the display will show:
Y=Yes N=Del Esc=Exit
New Delay [ 60]Secs
********************
Enter the new Alarm delay in
SECONDS
(e.g. 60=1min, 600=10 minutes).
•
Alarm delays MUST be entered in mul�ples of 10 seconds,
star�ng from 0 (e.g. 0,10,30,50,100,120 etc).
When finished entering the New Alarm delay press the ‘
Y
’ key for the M60 to
accept the new Alarm delay, the ‘
N
’ to Delete incorrect entries, or ‘
Esc’
to
return to the Keypad op�ons.
•
To Exit keypad op�ons press the ‘
Esc’
key to return back to the
default display. If you fail to do this the M60 will automa�cally
revert back to ‘Default display’ a�er approximately 30 seconds.