15
Supply
After being thoroughly tested at our works the heating panels are safely packed and dispatched with a reputable transport
company. When your product arrives please check the outside appearance of the packing for any signs of damage. If you believe
that the package is damaged in any way please ask the delivery person to wait while you unpack it and check the state of the
goods within for damage.
If possible keep the panels and accessories in the original packing until you decide to install the product.
Scope of delivery framed models
After unpacking the goods please check and make sure that all of the following listed
parts are included and are not damaged.
-
1 x Heating Panel with Cable (A)
-
1 x Accessory Set which includes:
-
2 x Hanging Plates (B)
-
4 x Bolts M6 x 8 (C)
-
2 x Bolts M6 x 25 (D)
-
2 x Hooked Mounting Screws (E)
-
2 x Rawlplugs 8mm (F)
-
2 x Ring screws M6 (optional)
- 1 x Operating and Installation Handbook
Scope of delivery frameless models
After unpacking the goods please check and make sure that all of the following listed parts are
included and are not damaged.
-
1 x Heating Panel with Cable (A)
-
1 x Accessory Set which includes:
-
1 x Mounting device (B)
-
4 x Screws Pan Head M6 x 8 (C)
-
4 x Rawlplugs 8mm (D)
- 1 x Operating and Installation Handbook
If you discover that any parts are missing or damaged please contact the company where you purchased the product or contact our
service department.
The packing material is recyclable. Please make sure that this is disposed correctly.
WARNING - Make sure that the packing material is kept away from babies and small children as suffocation can result if
placed over their mouths or noses.
Installation
WARNING
Please read the section regarding ‘Basic Rules for Safety’ and details involving the installation location; the information regarding
safe distances and the operation of the panel.
Please take note of the following additional information regarding installation:
The minimum dimension from the back side of the panel to the wall must be 0,8 inches (2 cm). This will always be the
case if the items contained in the accessories are used. If other types of fitting systems are used our guarantee becomes
null and void.
The hot side of the heater is always the side with the sticker that says (Do not cover!) This sticker should always be visible
after installation.
Check before drilling holes that there are no electrical lines or water pipes hidden in the wall.
Make sure that the power supply socket that you intend to use is within distance of the location of where you intend to
install the panel
– The cable attached to the panel is 70,9 inches (1,8 m) long.
With difficult walls it may be necessary to use special rawl plugs.
When the ‘Hooked Mounting Screws’ are screwed into the wall it is important that they are screwed in right up to the
flange.
