17
Installation of frameless models
Hold the mounting device (B) at the desired spot to
the wall. The accordingly marked side has to be up.
The cross marks the center of the device. Preferably
use a water level for correct alignment.
Mark the four drill holes with a suited pen.
Put aside the mounting device and drill holes of 8 mm
diameter and at least 60 mm depth with a suitable drill
at the marked spots.
Push the Rawlplugs (D) into the holes. Be careful to
push them in wholly. The plugs are universally usable.
Now fix the mounting device to the wall using the
provided screws (C). Screw them fully into the
Rawlplugs. In case of cavity walls be careful to fixate
them tightly.
Place the heating panel (A) at the mounting device
and move it sideways until all four fixation points are
fully plunged in the fixing slots. The form of the fixing
slots prevents an easy unhanging of the heating
panel.
You can mount the heater element both vertically and
horizontally according to your requirements.
