User Manual V1.3 | XtracontrolDC2, XtracontrolET2, XtracontrolEC21
3
Product description
The XtracontrolDC2 Dialog Controller is a control module with a display for the control and regulation of automation
and industrial processes in low-voltage installations in real time.
The XtracontrolEC21 Box Controller has the same functions as the XtracontrolDC2 Dialog Controller, but without the
display.
The programming tool CODESYS 3.5 (IEC 61131-3) from 3S-Smart Software Solutions is used for programming the
device.
The Ethernet terminals are specially configured for CODESYS visualisation and operation in machines and systems.
The terminals show the CODESYS Web visualisation or the CODESYS Target visualisation, irrespective of whether
the visualisation originates from a Infranor PLC control unit or some other compatible CODESYS control unit.
XtracontrolDC2 and XtracontrolEC21 controllers can be connected using various different interfaces and have in
addition their own digital and analogue inputs / outputs.
On the devices with displays (XtracontrolDC2 and XtracontrolET2) the connection area for all external connections is
located at the rear. These devices are intended for installation on a flat surface in a pre-prepared installation cut-out.
The connections to the XtracontrolEC21 Box Controller are located on the front. This device is intended for
installation on a mounting rail in the control cabinet.
All connections are of the plug-in type.
© Infranor GmbH
11
Summary of Contents for Xtracontrol DC2
Page 1: ......