SOUND DETECTAI USER MANUAL
39
MEDIA EXPORTED TO A USB DRIVE WILL NOT BE UPLOADED TO THE CLOUD.
MEDIA CAN BE UPLOADED LATER.
8-5-5-3 Cloud Storage
The user can use the SmartIR Cloud Platform to export media held on the internal
memory of the device. This allows the user to transfer the images to a computer
for analysis.
Media is copied to the cloud and deleted from the device during export and
cannot be recovered using the device.
Export media as follows:
1.
Power on the device.
2.
Tap the Gallery icon.
3. Tap the Upload icon.
4. Choose an option:
•
Tap Upload to Cloud to enable automatic cloud exporting. On means
enabled. Off means disabled.
•
Tap Upload to Cloud Now to manually export media. Do not turn off the
device during the export.
5.
Gallery will close automatically when export is complete.
COMING SOON
DO NOT POWER OFF THE DEVICE DURING THE EXPORT. POWERING OFF THE
DEVICE DURING EXPORT MAY CORRUPT THE TRANSFER AND CAUSE A LOSS
OF MEDIA AND/OR DATA.
MEDIA IS COPIED TO THE CLOUD AND
DELETED FROM THE DEVICE DURING
EXPORT AND CANNOT BE RECOVERED USING THE DEVICE. ENSURE EXPORT
IS NECESSARY BEFORE EXPORTING.
8-5-6 Delete Media
Media can be deleted at any time as follows:
1.
Using the touchscreen, tap the Gallery icon. Press and hold the thumbnails;
then, drag left or right to scroll through the gallery.
2. Tap the media to delete. Media information is shown to the right.
3. Tap the Trash Can icon.
4. Tap Yes to confirm media deletion. Tap No to cancel media deletion.
5.
Tap ← to exit the gallery.
8-6 Application Modes
The device supports the following application modes:
•
Air Mode: used for localization of compressed air leaks.
•
Power Mode: used for localization and classification of high-voltage and
medium-voltage partial discharges.