background image

SOUND DETECTAI USER MANUAL

8

2-6     Manual Update

The user manual will be updated from time to time. To access the latest manuals, 

translations of manuals, and notifications, go to:

https://infraredcameras.com/product-resources/

The manufacturer reserves the right to alter the specifications of the product 

without prior notification. The manufacturer allows himself the right to modify 

without any preliminary opinion the technical specifications of the product.

2-8     Authoritative Versions 

The  authoritative  version  of  this  publication  is  English.  In  the  event  of 

divergences due to translation errors, the English text has precedence.

Any late changes are first implemented in English. Other languages may or may 

not be available.

2-5

     Intended Use 

The Sound DetectAI is a standalone system for localizing sound sources and 

acoustic  analysis.  It  uses  124  microphones  to  locate  acoustic  sounds  and 

visualizes them on a 5” color touchscreen. 

The device is not a measurement instrument for precise acoustic or other 

measurements. The dB readings produced by the device are not guaranteed to 

correspond to absolute sound pressure levels.

Environment of use: 

industrial and petrochemical buildings, electrical plants, 

environments with potential gas leaks, science labs, animal reserves as well 

as environmental conservatories, among others.

You agree that this product is for civilian use only, and shall not use applications 

that may infringe the rights of third parties, medical and safety devices or other 

applications where product failure may lead to life-threatening or personal injury, 

as  well  as  weapons  of  mass  destruction,  chemical  and  biological  weapons, 

nuclear explosions, unsafe use of nuclear energy, dangerous or humanitarian 

purposes. Any loss or liability caused therefrom shall be at the your own risk.

2-7     Scope of Application 

Infrared Cameras, Inc. issues generic manuals that cover several cameras 

within a model line.

This means that this manual may contain descriptions and explanations that do 

not apply to your particular camera model. This manual may contain technical 

inaccuracies or typographical errors.

Summary of Contents for SOUND DETECTAI































































Reviews: