14|English
Dia5
VARIABLE SPEED CONTROL SELECTOR (SEE Dia5)
The maximum speed can be altered by turning the speed selector wheel. Turn clockwise
to increase and anti-clockwise to decrease speed. The speed of the drill varies with the
amount of pressure applied to the on/off switch (trigger), i.e. more pressure for higher
speed
ADJUST THE AUXILIARY HANDER(SEE DIA6)
The auxiliary hander has several use positions. Please undo/loosen the lock knob to find
the best one.
USING THE SANDER
The workpiece to be sanded must be secured. If it is small or it may move during sanding,
it must be held in a vice or suitably clamped.
Be sure to hold the sander firmly whilst it is on and apply it gently to the work, it may
"kick" on first contact. Hold the sander so that it is flat on the work and move slowly,
preferably with a smooth, circular motion. Regularly check the condition of the sanding
paper and replace when worn for best results.
Dia4
Summary of Contents for RS4508
Page 17: ...17 English RS4508 URS4508...
