Triton Go Product Manual |
Connectors Guide
INGENIA | 05/29/2017
37
31
http://doc.ingeniamc.com/pages/viewpage.action?pageId=40666958
32
http://www.mouser.es/ProductDetail/Molex/87568-2693/?qs=%2fha2pyFaduijcrgN%2fQheCLb8TMIMOIA%2fI
%2fmcI7W2Vpg%3d
33
http://es.farnell.com/molex/87568-2693/connector-receptacle-2mm-26way/dp/2112403?
ost=87568-2693&selectedCategoryId=&categoryNameResp=Todas%2Blas%2Bcategor
%25C3%25ADas&searchView=table&iscrfnonsku=false
34
http://www.digikey.es/product-search/es?keywords=87568-2693
Notes
•
LED outputs are open collector with a 220
Ω
resistor in series for current limiting. However the output is
tolerant to 30 V and can be used with panel indicators powered at 12V or 24V, just ensure current does
not exceed 25 mA.
•
All the inputs and outputs are tolerant to 30 V, therefore they can be wired to PLC interfaces.
• See
for further information about different I/O wiring.
I/O & LEDs connector presents a high number of pins and can be wired using ribbon cable or multi-core crimped
cable.
Ribbon cable mating
Descriptio
n
Milli-Grid
™
Cable-to-Board Receptacle, Dual Row, IDT, Lead-Free, 26 Circuits, 0.38µm Gold
(Au)
Selective Plating, with Center Polarization Key and Locking Friction Ramp
Image
Triangle on the bottom left indicates pin 1.
Part
number
Molex 87568-2693
Distributo
r code
Mouser
Flat wire
Descriptio
n
Flat cable 26 conductors, 1 mm pitch, 28 AWG, stranded
Image
