SKYZER TECHNOLOGIES
PAGE 26 OF 146
3.3
Installing an iPP310 PIN pad
To install an iPP310 PIN pad, perform the steps below:
NOTE: Refer to page 19 to see Port Layout as where the PIN pad cable will be
connected to on the iCT2XX terminal. When plugging in, please ensure that
the terminal is powered off.
Step Terminal Display
Comment
1.0
Press FUNC
2.0
FUNCTION?
Enter 77 and press ENTER.
3.0
ENABLE
EXTERNAL PINPAD
Press ENTER to enable the external pinpad port on the terminal or CLEAR to
cancel and exit to idle prompt.
4.0
PINPAD TYPE
1-IPP310
Press ENTER to select IPP310 or CLEAR to cancel and exit to idle prompt.
5.0
RESTARTING
TERMINAL....
Terminal and PIN pad will be restarted to establish the link with each other.
6.0
PAYMARK
EFTPOS
PIN pad will display PAYMARK EFTPOS on the screen once the link with the
terminal is successful.
3.4
Deactivating an iPP310 PIN pad
To deactivate an iPP310 PIN pad, perform the steps below:
Step Terminal Display
Comment
1.0
Press FUNC
2.0
FUNCTION?
Enter 77 and press ENTER.
3.0
DISABLE
EXTERNAL PINPAD
Press ENTER to disable the external pinpad port on the terminal or CLEAR to
cancel and exit to idle prompt.
4.0
RESTARTING
TERMINAL....
Terminal and PIN pad will be restarted and PIN pad will be disabled.
INGENICO ICT2XX 2017 PAYMARK SOFTWARE OPERATING GUIDE
VERSION 1.0