Instruction Manual/Gebrauchsanleitung S 50 05/2019 V 2.7
Page / Seite 5 / 18
Damages to health due to infectious liquids and pathogenic germs.
●
When handling infectious liquids and pathogenic germs, observe the national regulations, the
biological security level of your laboratory, the material safety data sheets and the manufacturer`s
application notes.
●
Wear personal protective equipment
●
For comprehensive regulations about handling germs or biological material of the risk group II or
higher, please refer to the “Laboratory Biosafety Manual” in its respectively current valid version from
the World Health Organisation
Risk of fire
●
Do not use this device to process any highly flammable liquids
Damage to health due to contaminated device and accessories
In the following cases, sample material can be released:
-
improperly fixed agitator vessels
-
unstable vessels
-
damaged sealings
-
smashed glass vessels
●
Only mix in suitable vessels
●
Observe the nationally prescribed safety environment when working with hazardous, toxic and
pathogenic samples. Pay particular attention to personal protective equipment (gloves, clothing,
goggles, etc.), extraction, and the safety class of the lab.
●
Decontaminate the device and the accessories before storage and shipping.
Poor safety due to inadequate fixing of the unit
●
Ensure that the unit is firmly attached to a solid stand.
Poor safety due to incorrect accessories and spare parts.
The use of accessories and spare parts other than recommended by Ingenieurbüro CAT, M. Zipperer
GmbH may impair the safety, function and precision of the device. Ingenieurbüro CAT, M. Zipperer
GmbH cannot be held liable or accept any liability for damage resulting from the use of incorrect or
non-recommended accessories and spare parts, or from the improper use of such equipment.
●
Only use accessories and spare parts recommended by Ingenieurbüro CAT, M. Zipperer GmbH
Crush hazard due to moving parts
●
Always use a stirring shaft protector
●
Do not replace any consumables as long as the device is running.
●
Do not detach the stirring shaft protector as long as the device is running
●
Only switch-on the device with properly mounted tools and completely closed stirring shaft
protector.
3.1.
Warning signs on the device
This symbol indicates to read the instruction manual carefully prior to operation of the
instrument. Please mark points which require special attention in your field of
application so they are not overlooked. Disregarding of warnings may result in impairment of
serviceability as well as impairment of the user.
