8
Install Silver XM Control
step 3: rename the thermostat.
1. Select the new thermostat.
2. Change the thermostat’s name to something descriptive of its
location and/or function; for example, “Living Room Thermostat.”
The homeowner can change the name later if s/he wishes.
step 4: plug an appliance module into a live ac outlet.
Choose an AC outlet located approximately halfway between the Bridge and
thermostat and not blocked by large metal objects such as a refrigerator,
stove, or filing cabinet. Make sure the outlet you use is always on, meaning
that it can not be turned off from a wall switch.
Optional: Plug a lamp or small appliance into the module.
This option will depend on whether the appliance module’s
primary purpose is to serve as a repeater or also to control
a lamp or small appliance. An appliance or dimmer module
has two outlets:
• The outlet
with the Z-Wave logo can be controlled
via Nexia Home Intelligence.
• The outlet
without the Z-Wave logo is a standard
pass-through outlet, independent of Nexia Home Intelligence.
step 5: enroll the appliance module into the bridge.
1. Disconnect the Bridge from the router and AC power.
2. Insert a fresh 9V battery to power the Bridge during enrollment.
3. Carry the Bridge over to the appliance module. Hold the Bridge
within 6 feet (1.8 meters) of the module you want to enroll
during the following enrollment process.
4. Press and release the
+ button on the Bridge.
5. Press the enroll button on the appliance module.
6. Observe the indicator lights on the Bridge. The orange Z-Wave
light will blink during enrollment. Enrollment is complete
when the orange light stops blinking and glows continuously.
