Ingersoll-Rand HP60CMH, Operating, Maintenance & Parts Manual

SECTION 9 - PARTS ORDERING

 
GENERAL 

 
This publication, which contains an illustrated parts 
breakdown, has been prepared as an aid in locating 
those parts, which may be required in the main-
tenance of the unit. All of the compressor parts, 
listed in the parts breakdown, are manufactured with 
the same precision as the original equipment. For 
the greatest protection always insist on genuine 
Ingersoll-Rand Company parts for your compressor.  
 
The unit covered by the manual has been custom 
designed and built to satisfy our customer’s unique 
specifications by the Ingersoll-Rand Onboard Power 
Solutions Team.  
 
Some of the unique, special order components may 
not be included in the illustrated parts breakdown. 
Supplemental pages with photo illustrations have 
been added to assist in identifying special order 
parts when required for service orders.  
 
Contact the Onboard Power Solutions Parts 
Department for assistance when ordering these 
special parts.  Include the unit serial number with all 
orders. 
  

NOTE:  Ingersoll-Rand Company can bear no 
responsibility for injury or damages resulting 
directly from the use of non-approved repair 
parts. 

 
Ingersoll-Rand Company service facilities and parts 
are available worldwide. There are Ingersoll-Rand 
Company Construction Equipment Group Sales 
Offices and authorized distributors located in the 
principal cities of the United States. In Canada the 
Canadian Ingersoll-Rand Company, Limited services 
our customers. There are also Ingersoll-Rand 
International autonomous companies and authorized 
distributors located in the principal cities throughout 
the free world.  
 
Special order parts may not be included in this 
manual. Contact the Mocksville Parts Department 
with the unit serial number for assistance with these 
special parts.  
 

DESCRIPTION 

 
The illustrated parts break down illustrates and lists 
the various assemblies, subassemblies and detailed 
parts, which make up this particular machine. This 
covers the standard models and the more popular  
 
 

options that are available. A series of illustrations 
show each part distinctly and in location relative to 
the other parts in the assembly.  The part number, 
the description of the part and the quantity of parts 
required are shown on each illustration or on 
adjacent page.  
 
The quantities specified are the number of parts 
used per one assembly and are not necessarily the 
total number of parts used in the machine.  Where 
no quantity is specified the quantity is assumed to 
be one.  
 
Each description of a part is based upon the “noun 
first” method, i.e., the identifying noun or item name 
is always the first part of the description.  A single 
descriptive modifier generally follows the noun 
name. The descriptive modifier may be followed by 
words or abbreviations such as upper, lower, inner, 
outer, front, rear, RH, LH, etc. when they are essent-
ial.  
 
In referring to the rear, the front or to either side of 
the unit, always consider the drawbar end of the unit 
as the front.  Standing at the rear of the unit facing 
the drawbar (front) will determine the right and left 
sides.  
 

FASTENERS 

 
Both SAE/inch and ISO/metric hardware have been 
used in the design and assembly of these units. In 
the disassembly and reassembly of parts, extreme 
care must be taken to avoid damaging threads by 
the use of wrong fasteners. In order to clarify the 
proper usage and for exact replacement parts, all 
standard fasteners have been identified by part 
number, size and description. This will enable a 
customer to obtain fasteners locally rather than 
ordering from the factory.  These parts are identified 
in tables that will be found at the rear of the parts 
illustrations.  Any fastener that has not been ident-
ified by both part number and size is a specially 
engineered part that must be ordered by part 
number to obtain the exact replacement part.  
 

MARKINGS AND DECALS 

NOTE:  Do not paint over safety warnings or 
instructional decals.  If safety-warning decals be-
come illegible, immediately order replacements 
from the factory. 

 
 
 
Part numbers for original individual decals and their 
mounting locations are shown within Parts List.  

(

38

) 

Manual P/N 22189203 (01/17/2005)