EN-1
47631617001_ed5
EN
Product Safety Information
Intended Use: These Cordless Impact Wrenches are designed to remove and install threaded fasteners.
WARNING
●
Warning! Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
●
Responsibly recycle or dispose of Batteries. Do not puncture or burn batteries. Improper disposal may endanger the environment or cause
personal injury.
●
Only use Tools with appropriate voltage Ingersoll Rand batteries and Charger. Use of any other batteries may create a risk of fire, personal
injury or property damage.
For additional information, refer to Cordless Impact Wrench Safety Manual Form 04581146, Battery Charger Safety Information Manual
Form 10567832 and Battery Safety Information Manual Form 10567840.
Manuals can be downloaded from ingersollrandproducts.com
IQ
V
Power Control System
The intelligent control management system on this model can be adjusted with the power regulator. Select power mode by turning the dial at the
back of the tool and align the notch with the desired setting. Each mode provides intelligent power control in Forward and full power in Reverse.
Refer to illustration #1 on page 32.
Mode
Name
Description
Hand-tight
Torque-limiting, automatic shut-off
Wrench-tight
Half-power
Torque-limiting, continuous run
Max-power
Maximum torque, continuous run
WARNING
\
Impact wrenches are not torque wrenches. Connections requiring specific torque must be checked with a torque meter after fitting with an
impact wrench. Improperly torqued fasteners may loosen and cause injury.
Product Specifications
Tool Model
Voltage
Drive
Sound Level dB(A)
(EN60745)
Battery Model - BL2010, BL2022
V, DC
Type
Size
†Pressure (L
p
)
‡Power (L
w
)
Impacts per
Minute
Vibration (m/s
2
)
(EN60745)
bpm
Level
*K
W7152
20
Square
1/2”
95
106
2450
17.0
3.7
W7152P
Square (Pin Retainer)
W7252
Square (Extended, 2”)
17.2
2.3
W7172
Square
3/4”
92
103
16.6
1.9
Tool Model - W7152, W7152P, W7172, and W7252
Battery Model - BL2010, BL2022
Intelligent Power Control
No Load Speed
Shut-off
Max Torque
Direction
Mode
Name
ft-lb (Nm)
Forward
Hand-tight
600
Refer to Figure A
Wrench-tight
1000
Refer to Figure B
Half-power
0-1450
530 (720)
Max-power
0-1900
1000 (1360)
Reverse
ALL
Max-power
0-1900
1000 (1360)
† K
pA
= 3dB measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
* K = Vibration measurement uncertainty
Conforms to UL STD. 62841-1 & 62841-2-2.
Certified to CSA STD. C22.2 No. 62841-1 & 62841-2-2.
4004004
Summary of Contents for IQV20 W7002 Series
