22
MHD56490
Inspection Report
Make a photo copy of this form and use as an inspection record.
Ingersoll Rand MR150K Series Air Winches
Model Number:
Date:
Serial Number:
Inspected by:
Reason for Inspection: (Check Applicable Box)
1.
Scheduled Periodic Inspection: (_____ Months _____ Years)
2.
Discrepancy(s) noted during Frequent Inspection
3.
Discrepancy(s) noted during maintenance
4.
Other: ___________________________
Operating Environment:
Normal ____ Heavy____ Severe ____
Refer to the Product Information Manual and Product Parts Information Manual and
for general inspection criteria. Also,
refer to appropriate National Standards and Codes of practice. If in doubt about an existing condition, contact the nearest
Ingersoll Rand
Distributor or the factory for technical assistance.
Component
Condition
Corrective Action
Notes
Pass
Fail
Repair
Replace
Uprights and Siderails
Drum Band Brake (125% Load Test)
Disc Brake (125% Load Test)
Drum Band Brake (Visual Inspection)
Disc Brake (Visual Inspection)
Motor
Controls
Limit Switches
Air System
Fasteners
—
Emergency Stop Valve
Overload Device
—
Reduction Gears
Labels and Tags
—
Shafts
Winch Guard
Wire Rope Wedge
—
Emergency Lowering Device
—
Slack Line Device
—
Press Roller
Wire Rope
—
Other Components (list in Notes section)
Testing
Pass
Fail
Notes
Operational (No Load)
Operational (10% Load)
Operational (Maximum Test Load
(a)
)
(a)
Maximum test load is 125% of rated line pull. Testing to more than 125% of rated load may be required to set overload device or comply with
standards and regulations set forth in areas outside European Community countries.
