Ingersoll-Rand PAL1000K, Parts And Maintenance Manual

Form MHD56298

• A copy of our “Safe Operating Practices” Manuals are always available free of charge either by downloading it from our 
Technical Publications website @ www.airwinch.com or by contacting the Factory at (800) 866-5457 for North America and 
(206) 624-0466 for International. The Safe Operating Practices manual must be read prior to anyone operating a 

Ingersoll-Rand

 winch or hoist. The manual form numbers are as follows:

“Safe Operating Practices Non-Man Rider™ Winches” Manual, Form No. MHD56250 
“Safe Operating Practices for Man Rider™ Winches” Manual, Form No. MHD56251 
“Safe Operating Practices for Pneumatic, Hydraulic and Electric Hoists” Manual, Form No. MHD56295

• Available winch options may require additional supplements to the basic winch manual.

• For Man Rider™ winches ensure a copy of the Man Rider™ supplement is made available to the operator prior to winch 
operation.

• We strongly recommend that ALL maintenance on 

Ingersoll-Rand

 equipment be carried out by personnel certified by 

Ingersoll-Rand

, or by 

Ingersoll-Rand

 Authorized Service Centers.

• Contact the Factory if in doubt about installation, operation, inspection and maintenance instructions.

• Use only Genuine 

Ingersoll-Rand

 parts when maintaining or repairing a winch, hoist or any component of a winch or hoist.

• ANSI / ASME recommends that a winch or hoist (or any components of a winch or hoist) that has been repaired be tested 
prior to being placed into service:

Winch Man Rider

™

 Supplements:

Model:

Publication No.

Model:

Publication No.

FA2, FA2.5, 
FH2, FH2.5

MHD56046

LS500RLP

SAM0011

LS1000RLP

SAM0012

FA5 

MHD56042 and 
MHD56220

LS150RLP

SAM0082

LS150RLP/500/
1000

SAM0115

FA10

MHD56252

FA2.5A MHD56236

LS150RLP and 
LS150PLP-PH

SAM0120

FA2B and 
HU40A

MHD56207

LS500RLP-E

SAM0122

FH10MR

MHD56212

LS150RLP-
DP5M-F

SAM0184

Fulcrum Electric

MHD56277

LS500HLP/
LS1000HLP

SAM0004

LS150HLP

SAM0222

*

Winches  - 

ANSI / ASME B30.7 (BASE MOUNTED DRUM HOISTS) Refer to section 7.2.2 - Testing.

*

Hoists - 

ANSI / ASME B30.16 (OVERHEAD HOISTS - UNDERHUNG) Refer to section 16.2.2 - Testing.

Form MHD56298
Edition 2
November 2004
71441844

© 

2004 Ingersoll-Rand Company

IMPORTANT INFORMATION: