background image

      PL-MANW 

Rev.B, Nov’20 

- 14 - 

WARRANTY AND LIMITATION OF LIABILITY 

WARRANTY

 

Ingersoll Rand company warrants that the equipment manufactured by it and delivered hereunder shall be free of 

defects in material and workmanship for a period of twelve (12) months from the date of placing the equipment in 

operation or eighteen (18) months from the date of shipment, whichever shall occur first. The foregoing warranty 

period shall apply to all equipment, except the following: 

 Compressors purchased with an accompanying Start Up Kit that are operated solely on the inlcuded Ingersoll

Rand synthetic lubricant will have their bare compressor warranted for the earlier of twenty-four (24) months

from the date of initial operation or thirty (30) months from the date of shipment.

 Compressors purchased with an accompanying Extended Warranty Kit that are operated solely on the

included Ingersoll Rand synthetic lubricant and installed with the included pads and bolts will be warranted for

the earlier of twenty-four (24) months from the date of initial operation or thirty (30) months from the date of

shipment, and will have their tanks and bare compressors warranted for the earlier of sixty (60) months from

the date of initial operation or sixty-six (66) months from the date of shipment.

 Replacement parts will be warranted for six (6) months from the date of shipment.

Should any failure to confirm this warranty be reported in writing to the company within said period, the company 

shall, at its option, correct such non-confirmity by suitable repair to such equipment, or furnish a replacement part 

F.O.B point of shipment, provided the purchaser has installed, maintained and operated such equipment in 

accordance with good industry practiced and has complied with specific recommendations of the company. 

Accessories or equipment furnished by the company, but manufactured by others, shall carry whatever warranty 

the manufacturer conveyed to Ingersoll Rand Company and which can be passed on to the purchaser. The 

company shall not be liable for any repairs, replacements, or adjustments to the equipment or any costs of labour 

performed by the purchaser without company’s prior written approval. 
The company makes no performance warranty unless specifically stated within its proposal and the effects of 

corrosion, erosion and normal wear and tear are specifically excluded from the company’s warranty. In the event 

performance warranties are expressly included, the company’s obligation shall be to correct in the manner and for 

the period of time provided above.  

THE COMPANY MAKES NO OTHER WARRANTY OF REPRESENTATION OF ANY KIND WHATSOEVER, 

EXPRESSED OR IMPLIED, EXPECT THAT OF TITLE, AND ALL IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND HEREBY DISCLAIMED. 

Correction by the company of non-conformities, whether patent or latent, in the manner and for the period of time 

provided above, shall constitute fulfillment of all liabilities of the company and its distributers for such non-

conformities with respect to or arising out of such equipment. 

LIMITATION OF LIABILITY 

THE REMEDIES OF THE PURCHASER SET FORTH HEREIN ARE EXCLUSIVE, AND THE TOTAL LIABILITY 

OF THE COMPANY, ITS DISTRIBUTERS AND SUPPLIERS WITH RESPECT TO CONTRACT OR THE 

EQUIPMENT AND SERVICES FURNISHED, IN CONNECTION WITH THE PERFORMANCE OR BRANCH 

THEREOF, OR FROM THE MANUFACTURE, SALE, DELIVERY, INSTALLATION, REPAIR OR TECHNICAL 

DIRECTION COVERED BY OR FURNISHED UNDER CONTRACT, WHETHER BASED ON CONTRACT, 

WARRANTY, NEGLIGIANCE, INDEMNITY, STRICT LIABILITY OR OTHERWISE SHALL NOT EXCEED THE 

PURCHASE PRICE OF THE UNIT OF EQUIPMENT UPON WHICH SUCH LIABILITY IS BASED. 

THE COMPANY, ITS DISTRIBUTERS AND ITS SUPPLIERS SHALL IN NO EVENT BE LIABLE TO THE 

PURCHASER, ANY SUCCESSORS IN INTEREST OR ANY BENEFICIARY OR ASSIGNEE OF THE 

CONTRACT FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES 

ARISING OUT OF THIS CONTRACT OR ANY BREACH THEREOF, OR ANY DEFECT IN, OR FAILURE OF , 

OR MALFUNCTION OF THE EQUIPMENT, WHETHER OR NOT BASED UPON LOSS OF USE, LOSS 

PROFITS OR REVENUE, INTEREST, LOST GOODWILL, WORK STOPPAGE, IMPAIRMENT OF THE OTHER 

GOODS, LOSS BY REASON OF SHUTDOWN OR NON-OPERATION, INCREASED FOR SERVICE 

Summary of Contents for PL-MANW















































Reviews: