4
Keypad Lock (FE575 and FE595)
Lock Parts
Keypad
•
Located on the outside of the lock.
•
Used to enter codes for programming and unlocking.
Lever
•
The inside lever can be rotated at any time to retract
the latch.
•
The outside lever can be rotated at any time, but will
only retract the latch when the lock is unlocked.
Cylinder
•
Located on the outside of the lock.
•
Used only in emergency situations to unlock the lock.
See
Thumbturn
•
FE595 ONLY: Used to put the lock in a locked or
unlocked state.
FE595
FE575
Thumbturn
Cylinder
Keypad
Lever
Standard Operation
If lighting is low, press the Schlage button to illuminate the keypad before beginning.
Temporary Unlocking
Setting to Unlocked State (FE595 Only)
1. Enter a User Code
into the keypad.
2. Rotate the lever to
open the door. Door
will automatically
re-lock.
1. Rotate the inside
thumbturn to the
vertical position.*
2. Rotate the
thumbturn back
to the horizontal
position to re-lock.
* No User Code is required to open the door when the lock is in
this state.
