background image

AIR COMPRESSOR GROUP

BONDED WARRANTY & REGISTERED START UP

Warranty

Note that this is Ingersoll Rand standard warranty. Any warranty in force at the time of purchase of the compressor or 

negotiated as part of the purchase order may take precedence over this warranty.

Register on-line at http://air.ingersollrand.com

Ingersoll Rand 

Industrial Air Solutions

Swan Lane

Hindley Green

Wigan WN2 4EZ

Ingersoll Rand Asia Pacific

C/O Ingersoll Rand South East Asia (Pte) Ltd. 

42 Benoi Road 

Singapore 629903 

Ingersoll Rand

Industrial Air Solutions

P.O. Box 1840

800−D Beaty Street

Davidson, NC 28036

The Company warrants that the equipment manufactured by it and delivered hereunder will be free of defects in material and 

workmanship for a period of twelve months from the date of placing the Equipment in operation or eighteen months from the 

date of shipment from the factory, whichever shall first occur. The Purchaser shall be obligated to promptly report any failure to 

conform to this warranty, in writing to the Company in said period, whereupon the Company shall, at its option, correct such 

nonconformity, by suitable repair to such equipment or, furnish a replacement part F.O.B. point of shipment, provided the 

Purchaser has stored, installed, maintained and operated such Equipment  in accordance with good industry practices and has 

complied with specific recommendations of the Company. Accessories or equipment furnished by the Company, but manufac-

tured by others, shall carry whatever warranty the manufacturers have conveyed to the Company and which can be passed on to 

the Purchaser. The Company shall not be liable for any repairs, replacements, or adjustments to the Equipment or any costs of 

labor performed by the Purchaser or others without Company‘s prior written approval.

The effects of corrosion, erosion and normal wear and tear are specifically excluded. Performance warranties are limited to those 

specifically stated within the Company‘s proposal. Unless responsibility for meeting such performance warranties are limited to 

specified tests, the Company‘s obligation shall be to correct in the manner and for the period of time provided above.

THE COMPANY MAKES NO OTHER WARRANTY OR REPRESENTATION OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, 

EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE 

HEREBY DISCLAIMED.

Correction by the Company of nonconformities whether patent or latent, in the manner and for the period of time provided 

above, shall constitute fulfilment of all liabilities of the Company for such nonconformities whether based on contract, warranty 

negligence, indemnity, strict liability or otherwise with respect to or arising out of such Equipment. 

The purchaser shall not operate Equipment which is considered to be defective, without first notifying the Company in writing of 

its intention to do so. Any such use of Equipment will be at Purchaser‘s sole risk and liability.

Summary of Contents for SSR UP5-11c

















































Reviews: