http://air.ingersollrand.com
InSTALLATIOn / HAnDLInG
OPeRATIOn AnD MAInTenAnCe MAnUAL
eLeCTRICAL DATA-UP5 4
Standard voltage
0V
00V
Full load current (maximum)
.A
.5A
Starting current DOL (Star Delta)
Starting time DOL (Star Delta)
–5 Sec (–10 Sec)
Starts per hour (maximum)
Control voltage
120VAC
Recommended fuse rating See note 1
1A
1A
Recommended wire size See note 2
mm
2
Cu
mm
2
Cu
eLeCTRICAL DATA-UP5 5.5
Standard voltage
0V
00V
Full load current (maximum)
11.A
11.2A
Starting current DOL (Star Delta)
100
5
Starting time DOL (Star Delta)
–5 Sec (–10 Sec)
Starts per hour (maximum)
Control voltage
120VAC
Recommended fuse rating See note 1
1A
1A
Recommended wire size See note 2
mm
2
Cu
mm
2
Cu
eLeCTRICAL DATA-UP5 7.5
Standard voltage
0V
00V
Full load current (maximum)
1.A
15.A
Starting current DOL (Star Delta)
121 ()
11 (52)
Starting time DOL (Star Delta)
–5 Sec (–10 Sec)
Starts per hour (maximum)
Control voltage
120VAC
Recommended fuse rating See note 1
20A
20A
Recommended wire size See note 2
mm
2
Cu
mm
2
Cu
eLeCTRICAL DATA-UP5 11c
Standard voltage
0V
00V
Full load current (maximum)
2.0A
21.A
Starting current DOL (Star Delta)
()
(5)
Starting time DOL (Star Delta)
–5 Sec (–10 Sec)
Starts per hour (maximum)
Control voltage
120VAC
Recommended fuse rating See note 1
2A
2A
Recommended wire size See note 2
mm
2
Cu
mm
2
Cu
1. If a circuit breaker is selected it should only be a
magnetic trip type, set above the anticipated starting
current of the machine, but below the maximum
prospective fault current for the circuit. The circuit
breaker or fuseable disconnect must be capable of
breaking the prospective fault current at its terminals.
2. PVC/PVC Type Calculated using the following
conditions:
PVC insulated cable, armoured, copper
conductors.
i)
Cable clipped to a wall, in free air.
Ambient temperature of 0°C (10°F) and relative
humidity of 0%.
20m (5ft) cable run.
Volt drop limited to –10% during starting, –%
during normal running.
Protected by the circuit breaker listed above.
ii)
iii)
iv)
v)
vi)