Default
-
Default is the initial power up value
assigned to a specific function. For example,
the unlock relay default time is 5 seconds.
User positions
-
There are 100 user
positions available:
Master code
-
Always user position 1:
Entering code unlocks door, Entering code
after 99# accesses programming mode.
Supervisors
-Always user positions 2
and 3: Entering code unlocks door, Cannot
access programming mode, Clears 30
second lockout alarm (wrong entries)
before it times out.
The remaining ninety-seven user positions 4
through 100 are non-programming and may
contain one of three types of user codes. They
include:
User
-
Entering code unlocks door, and if
equipped with optional 7308 board actuates
relay 2.
Duress
-
Entering code unlocks door, and if
equipped with optional 7308 board actuates
relay 2 and relay 4.
Lockout
-
Entering code toggles use of codes
in higher user positions ON/OFF.
2
Summary of Contents for VON DUPRIN 7311
Page 5: ...3...
Page 11: ...6...
Page 13: ...7...
Page 17: ...INGERSOLL RAN D VON DUPRIN ARCHITECTURAL HARDWARE 6175010 1 01...
