7
6
Caution:
Do not connect the lamp to the power source
before completing the assembly!
Enclosed:
1 power supply unit with cable
Assembly
Unpack the lamp very carefully, using both hands. Insert the
low-voltage plug in the socket on the base and check that it
is securely in position.
On-off switch and dimmer
To switch the light on or off, briefly touch (< 1 second) the
sensor pad (
1
) on the lamp base. To adjust the brightness,
keep your finger on the sensor pad until the desired level is
reached.
1
The lamp will flash briefly when maximum brightness is
reached. When the lamp is switched off, the last selected
brightness setting will be stored.
Attention:
When the sensor button is continously touched
unwanted dimming effects will occur. Release the button
between the single operating steps for a short moment and
touch it again for the next function.
Changing the light bulb
Important:
The lamp may only be used with the LED bulb
supplied, which is manufactured exclusively for Ingo Maurer
GmbH. Replacements are available only from us or from our
authorized retailers.
English
Caution:
Unplug the lamp and allow it to cool down com-
pletely.
Pull the red connecting wire out of the socket before un-
screwing the spent bulb. Carefully unwind the connecting
wire on the replacement bulb, thread it through the ring and
screw the bulb into the socket. Adjust the position of the
connecting wire to allow for the brass mounting wire. Finally,
insert the end of the connecting wire in the contact on the
lamp base.
Important:
The LED bulb is NOT compatible with the
halogen version of
Lucellino
!
Cleaning
The goose-feather wings can be dusted carefully with a
paintbrush.
Technical specification
230 V~50 Hz, 125 V~60 Hz.
The correct voltage and frequency
for your lamp are indicated on the type label.
Secondary 19V DC, 3W, 95 CRI. According to the manu-
facturer, the LED has an average life of 25 000 hours.
A
LED bulb - energy efficiency class A.
Important:
The lamp may only be used with the LED bulb
supplied, which is manufactured exclusively for Ingo Maurer
GmbH. Replacements are available only from us or from our
authorized retailers.
Any repairs that become necessary must be carried out by
a qualified electrician. In the event of damage to the power
cord, replacements may only be fitted by Ingo Maurer GmbH.
English
Summary of Contents for Lucellino
Page 8: ...12 1 1 ...
